Alumni Masters

Ahmed Najjar is a Master’s student in the chemical engineering department at Polytechnique Montreal. He joined PEARL’s group in the fall of 2020. Ahmed obtained his B.SC in industrial chemistry from the National Institute of Applied Sciences and Technology (INSAT) in Tunisia. He also got his previous M.SC in chemical process engineering from Aix-Marseille University, France, in 2016.

Upon graduation, he worked in the Clean Combustion Research Center at KAUST, Saudi Arabia, ...

Lana obtained her bachelor’s degree in Chemical Engineering at Polytechnique Montréal. During her studies, she did two internships in different domains. In 2020, she started her master’s studies in chemical engineering in the Process Engineering Advanced Research Lab at Polytechnique Montréal to develop her research skills and graduated in 2024.

Mona accomplished her bachelor degree in chemical engineering at the university of Alexandria, Egypt. During her study she had four internships in different domains. She has 10 years of experience in the industrial in the domain of water treatment and lab technologies.

She joined PEARL group since January 2019 to begin her master studies in chemical engineering at Ecole Polytechnique of Montreal to develop her research skills.

Gautier was a final-year student at École polytechnique Paris-Saclay, a leading Engineering School near Paris (France), preparing a Master Degree in Chemical Engineering. He prepared a double Degree with a Master in Polytechnique Montreal (Canada). He had joined PEARL since September 2017, and he is working on reactions initiated by microwave in fluidized beds.

Hassan got his technical university diploma in thermal and energy engineering at University Mohammed 5 of Rabat in 2014 and then received his bachelor in process, energy and environmental engineering from Ecole Nationale des Sciences Appliquées Agadir in Morocco in 2017. He acquired knowledge in unit operations, hydraulic, turbulence, HVAC, renewable energy, combustion and other related fields of process and energy engineering. Besides, he did 2 internships in technical services companies th...

Afshin Fallahi gained his B.Sc. degree in Chemical Engineering, Petrochemical Industries, from Shiraz University in Iran. He obtained his M.Sc. degree in Chemical Engineering, Design, Simulation and Process Control, in Iran University of Science and Technology, Tehran- Iran, in (GPA: 18.92 of 20; Top student). After immigration to Canada, he joined professor Jamal Chaouki research group at Chemical Engineering Department of Polytechnique Montreal in March 2016 as a research assistant with t...

Rémi was a final-year student at ENSIC – Ecole Nationale Supérieure des Industries Chimique, a leading Chemical Engineering University in Nancy (France), preparing a Master Degree in Chemical Engineering. He was preparing a double Degree with a Master in Polytechnique Montreal (Canada). He joined Prof. Chaouki’s group and Prof. Bertrand’s group in January 2016. His master project is about modeling mass transfer in bubble columns.

Gautier was a final-year student at École polytechnique Paris-Saclay, a leading Engineering School near Paris (France), preparing a Master Degree in Chemical Engineering. He prepared a double Degree with a Master in Polytechnique Montreal (Canada). He had joined PEARL since September 2017, and he is working on reactions initiated by microwave in fluidized beds.

William was a junior chemical engineer who accomplished his bachelor degree at the University of Sherbrooke during which he did five internships in different domain. He obtained a master degree in chemical engineering at Polytechnique of Montreal to develop his research skills. He had joined PEARL since January 2018.

Maryam graduated in chemical engineering from Sharif University of Technology, Iran in Jun. 2014. She joined PEARL in Jan. 2015. Her masters’ project is about quantifying rare earth elements by neutron activation analysis. She is working on improving analysis procedure for detecting rare earth elements for different separation processes.

Professor Macchi completed both his BEng and MASc at Ecole Polytechnique de Montréal, after which he attended the University of British Columbia for his PhD.  During his graduate studies he worked on a variety of fundamental and applied multiphase reaction engineering projects, such as the drying of slurries in a spouted bed, the hydrodynamic scaling of a high-pressure foaming three-phase fluidized bed hydroprocessor (LC-FinerSM), and a kinetic study of vanadium phosphorus oxide catalyst em...

Samira Aghaee Sarbarze received her bachelor’s degree of Chemical Engineering from the prestigious University of Tehran, Iran in 2011.

She joined Chemical Engineering Department of Ecole Polytechnique de Montreal in September 2013, and started her graduate program under supervision of professor Jamal Chaouki.

Samira’s research is part of the large research network of Automotive Canada Partnership (ACP) sponsored by Johnson Matthey that is going to develop a process for produ...

I have a global scientific background. Indeed, I am graduated in general engineering from the Ecole des Mines de Nantes in France. I also obtained in 2014 a double diploma at the Ecole Polytechnique of Montreal in Canada where I completed a research-based master’s in chemical engineering. I am completing my education by an advanced master in environmental engineering at Mines ParisTech during one year with an apprenticeship training.

As I have a lively interest in environment and ren...

Navid received his B.Sc (2010) and M.Sc (2013) degree in materials engineering at Amirkabir University of Technology and University of Tehran, Iran. Worked for 3 years in the field of NDT of welded joints, piping and materials selection he moved to Montreal, Canada and started his second master in Chemical Engineering under the supervision of Prof. Jamal Chaouki in 2014. He is currently s...